Autóipar

Special connector 8-pol. car control system

Interface connector at the electrical car control unit

Component geometry and various contacts, assembled precisely to allow overmoulding

Determination of a die-cast material for this application and contacts with a very low tolerance deviation. Respective connector construction to grant a non-deforming construction form

Die-casting technology, tool construction. Component construction / development

Sondersteckverbinder Sensoranschlussleitung - Abgassensor

Interface connector for sensor connection in cars

Customer-specific component geometry and various coding possibilities and colours

Complete new construction and development of a connector range according to customer guidelines

Die-casting technology, tool construction. Component construction / development

30-way SMD/THR connector for communication system in cars

Board-to-board connector between two PCB's in rectangular
arrangement each other

Process-secure solution with the combination of SMT termination with coplanarity of <= 0,1mm for the horizontal PCB and with
THR termination for the vertical PCB
in one connector over 30 poles

New SMD/THR contact design für precious contact pin and
hot runner mould tool design for precious insulator and
automatic assembly machine with tape-on-reel packaging
for process security.

Injection mould tool
Injection moulding
Automatic contact assembly
Core competence of connectors

Overmoulded 3pole connector with solder pins 180°

Gear sensor in car

Connector geometry and extended contact length
and compliance to PCB hole tolerances for secure solder process

Definition of according moulding material and
contact pin with minimal tolerances.
Tool design for overmould tool with insertion of contact pins
for manufacturing of distortion-free connector
with exact dimensions

Mould tool design and mould tool manufacturing
Injection moulding technolgy
Core competence in connectors

8-way SMD connector, special solution for automotive applications.

Interface connector for sensoric connection in cars.

Full-automatically SMD mounting (pick’n place). Connector with massive (solid) contacts of high capacity. Connectors to be taken from reels for the automatic assembly onto the PCB.

Completely new conception of an isolating component with

Plastic injection moulding, assembling techniques, core competence of connectors.

Special automotive connector.

Central alarm control system in cars.

Connection of sensor and power cables to an electronic analysis system, There was no standard connector product available on the market which met with the customers requirements.

Construction of a special connector according to the mechanical and eletrical requirements of the application, including existing low cost contacts, production of a special isolating component and assembly to a complete connector.

Plastic moulding, assembly, experience in connector design and development.

Hood system for cars and busses.

Used for the rear seat entertainment system of luxury cars and as interior cabling for busses and trams world wide.

A shielded connector with locking system, designed for automobile application, vibration safe, blind assembly, push

New development of the QLH system incorporated into one product which meets with ALL the requirements of our customers from different industries.

Plastic moulding technology, metallized plastic, crimp technology, EMV technique, Cable assembly.

Wire clip - wire soldering aid.

Board to board connection, board to connector / sensor / switch. Connection of safety related components / systems in cars and other industries.

Soldering of single wires onto a board (PCB), incorrectly/ assembled wires, strain relief, low assembly height, not using a standard connector (connector/contacts), 100% direct connection, fail-safe (no additional contacts).

New development of solder aid with integrated locking clip. The preassembled cable or single wires ensures that the wires are connected correctly to the board. Quick assembly onto the board. No contact resistance due to intermediate accessories (contacts).

Product design / development, plastic moulding, cable assembly.

Screened, 90° (L-shaped) hood with two cable outputs, automotive licensed lock system and location pins.

For screened interior cable in upper-class cars.

Small space needed, safe assembly and locking at serial production on assembly line, acoustic „click“ feedback when locking, easy and safe assembling, low weight.

New designed L-shaped metallized plastic hood with integrated clip system including two location pins on the mating connector.

Plastic Hood design injection moulding, stamping technology. Metallised Plastic: EMV technology.

Metallized plastic hood, clipped with new QLH locking system, up to 3 cable outputs.

Interior cable in upper-class car.

High screening against radiation, safe assembly and locking at serial production on assembly line, acoustic „click“ feedback when locking, easy and safe assembling.

Design of a new locking technique with integrated clip system, HF - tight design with 3 optional cable outputs in light construction.

Plastic Hood design of injection moulding, stamping technology. Metallised plastic EMV technology.

4 pole, 600V - D-SUB.

Shielded power supply for servo motors up to 600V, 16Amps.

Compact 3 phase (4 pin) power connector with shielded hood.

Compact 4 pole insulator mounted into standard 15 pole metal shells available with stamped contacts and machined Provertha contacts. The connectors are codable - mixed contacts (pin or socket) can be used in each connector (male / female). The power connectors are used in conjunction with Provertha QLHs.

Plastic connector design, injection moulding. Metallized plastic and Crimp contact technology.

Shielder D-SUB for Automobile.

Assembled to the

RF shielded connector with integrated locking pins. Used for Audio - Video transmission for the audio central control in high class systems.

25 pole Provertha standard connector, integrated into a special metal housing, mounted with 2 special QLH locking pins. The attached cable has our special quick lock hood (QLH) mounted.

Design and manufacture of special metal housing. Connector manufacture, EMV technology, metal (housing) stamping technology.